Nema 17 BFISC42-P3A3 Integrated Linear Stepper Servo Motor with External Ball Screw 42x42x69.9mm Pulse Control (CANopen,RS485 Optional) 1.68A 0.50N.m

An integrated stepper motor with a ball screw is a self-contained motion control solution that merges a stepper motor with a ball screw assembly. The ball screw, known for its low friction and high efficiency, converts the rotational motion of the stepper motor into precise linear motion. This integration eliminates the need for couplings and external support structures, reducing space and enhancing system performance.

Besfoc nema 17 BFISC42-P3A3 42x42x69.9mm integrated external ball screw stepper servo motor with pulse control 1.8Degree 1.68A 1.55Ω 0.5N.m with 17bit integrated driver. For more different integrated servo motor requirements please contact us!!!

Customized Requirements：

• Different shaft and stroke length

• Special nut design

• Higher IP protection

Electrical Specifications：

• Type: Nema17 external ball screw linear stepper servo motor with built-in driver

• Model Name: BFISC42-P3A3

• Phase: 2

• Step Angle: 1.8 degree

• Current: 1.68A

• Resistance: 1.55Ω

• Inductance: 2.8mH

• Holding Torque: 0.50Nm(70.80oz.in)

• Encoder: 1000ppr / 17Bit / 15Bit

• Control Method: Pulse (RS485, CANopen optional)
  

  
  

Physical Specifications:

• Frame Size: Nema 17 (42 x 42mm)

• Body Length: 69.9mm

• Shaft Diameter: 5mm

• Shaft Length: 24mm

Integrated Linear Stepper Servo Motors Features:

• Cortex-M4 core high-performance 32-bit micro controller

• The highest pulse response frequency can reach 200KHz
  

• Built in protection function, effectively ensuring the safe use of the device
  

• Intelligent current regulation to reduce vibration, noise, and heat generation

• Adopting low internal resistance MOS, the heating is reduced by 30% compared to ordinary products

• Voltage range: DC12V-36V

• Integrated design with integrated drive motor, easy installation, small footprint, and simple wiring

• Equipped with anti reverse connection function
  

Communication method:

• Pulse type

• RS485 MOdbus RTU network type

• CANopen network type
  

  
  

Protection level:

Waterproof type: IP30, IP54, IP65, optional

42mm Integrated Linear Stepper Servo Motors Usage:

Besfoc integrated stepper motor linear actuator is available in non-captive, external linear and captive options. Captive and external linear are also available with integrated build in controller or driver.

They are available in a wide variety of resolutions from x mm/rev to y mm/rev. In addition to our standard configurations can we custom design this stepper motor linear actuator to meet your specific application requirements. The range come in six sizes from 20mm to 86mm square flange NEMA8, NEMA11,NEMA17,NEMA23 and NEMA34. 

Typical Application:

• Precise and rapid positioning

• X-Y tables

• Optical scanning equipment

• Mechanical or acoustic measurements

• Medical valve and pump equipment

• Semiconductor handling

• Industrial Multi axis machines

• Paperhandling

• Food processing